Skip to main content

Helifix PolyPlus Cartridge SF 300ml

Helifix PolyPlus Cartridge SF 300ml

Styrene-free polyester resin

Helifix PolyPlus SF is a user-friendly, styrene-free, nozzle-mixed polyester resin used to secure remedial wall ties and resin bonded anchors.

Send a product enquiry

Helifix PolyPlus SF is a user-friendly, styrene-free, nozzle-mixed polyester resin used to secure remedial wall ties and resin bonded anchors.

System Components

  • For securing remedial wall ties, resin bonded anchors and threaded rods
  • User-friendly styrene free materials
  • Usable in standard mastic gun
  • Two part nozzle-mixed resin for consistent quality
  • 300ml part-usable cartridge

Performance Data

Setting Times
Temperature Gel time Service load time
5°C 18mins 145mins
10°C 10mins 85mins
20°C 6mins 50mins
25°C 5mins 40mins
30°C 4mins 35mins

 

Typical Performance
12mm bolt, 110mm deep in 14mm hole 30/Nmm² concrete: Characteristic tensile load (N) 43, 3kN
Storage conditions: Cool, dry, frost-free conditions away from direct sunlight
Storage temperature: 5°C to 20°C

Applications

  • For securing remedial wall ties and resin bonded anchors

Directions for use as a Resin Anchor

(See individual Product Sheets on Helifix RetroTie and Helifix ResiTie for these applications)

  • Drill the hole to the correct diameter and depth using a rotary percussion drill.
  • Clean the hole using a stiff wire or nylon brush and clean compressed air or blow pump
  • Once the hole is prepared remove the screw cap from the cartridge.
  • Attach mixer nozzle, place in applicator gun and dispense the first part of the cartridge to waste until an even colour is achieved
  • Insert the mixer nozzle to the far end of the hole and half fill hole (depending upon the application). Withdraw nozzle as you fill the hole. For deep holes, extension tubing can be used.
  • Immediately insert the tie or fixing using a slight twisting motion.
  • Excess resin should be removed from the mouth of the hole before it sets.
  • Leave the fixing undisturbed until loading time has elapsed, then attach the fixture and tighten the nut.

Enquire Now

Mandatory Fields*

Find an Approved Installer

Helifix’s Approved Installers ensure customers can be confident that repairs are carried out using the latest techniques to obtain an efficient, reliable, cost-effective solution.

Find an approved installer